Comet Labs 48-Port 10 Instrukcja Użytkownika Pobierz pdf (Strona 60)

4.3 Re-Connecting the Power Module

This operation can be performed without interrupting the load.

Figure 4-2: Reconnect the Power Module.

EX 5/7/11 RT Systems

Maintenance4 — 4 86-86000-00 B01

1. Secure the Input/Output box using the three

screws.

2. Reconnect the cables and to the

Power Module.

3. Switch the battery circuit breaker(s) to the

ON position.

4. Check if Normal AC source circuit breaker

is on the ON position.

5. Check that the LED is ON.

6. Turn the manual bypass switch from the

BYPASS to the NORMAL position.

7. Follow initial start up sequence (See Section 3.1)

in order to personalize the UPS.

8. Push the ON button for more than 3

seconds.

The green LED is ON, and the connected

equipment is now protected by the UPS.

4240

OFF

LOAD LEVEL

4 kW/ 5 kVA

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 75 76

Brak uwag

Comet Labs 48-Port 10 Instrukcja Użytkownika Strona 60